Quantcast
  Loading... Please wait...

Signature Series Pipe Adaptor 2.0 inch O.D.

  • Image 1
Our Price:
$8.99
Product Code:
SKY1101
Rating:
Shipping:
Calculated at checkout
Quantity:


Product Description

Here's a really simple way use an existing pole to install a satellite dish! This Quick Pipe Adapter works great on SuperDish, WildBlue, and the new SlimLine antennas because it is 12 inches long and has a diameter of 2 inches. Just slide the lip over the edge of the existing pipe & wires, tighten the bolts, and mount your satellite dish to it! This will fit over a 1.66 pipe.

Features:

  • Length 12 Inches
  • O.D.: 2 inches ( Slimline, SuperDish, and Wildblue Compatible)

Installs in minutes!

  • 1: Slide pipe onto existing pole
  • 2: Tighten bolts to secure to existing pipe
  • 3: Mount satellite dish onto the adapter pipe.
Signature Series Pipe Adaptor 2.0 inch O.D.

Here's a really simple way use an existing pole to install a satellite dish! This Quick Pipe Adapter works great on SuperDish, WildBlue, and the new SlimLine antennas because it is 12 inches long and has a diameter of 2 inches. Just slide the lip over the edge of the existing pipe & wires, tighten the bolts, and mount your satellite dish to it! This will fit over a 1.66 pipe.

Features:

  • Length 12 Inches
  • O.D.: 2 inches ( Slimline, SuperDish, and Wildblue Compatible)

Installs in minutes!

  • 1: Slide pipe onto existing pole
  • 2: Tighten bolts to secure to existing pipe
  • 3: Mount satellite dish onto the adapter pipe.
Product #: SKY1101 Regular price: $8.99 $8.99 Available from: InstallerOasis.com Condition: Usually ships within 24 hours

Find Similar Products by Category

Write your own product review

Product Reviews

  1. needs updating but works with mods 3 Star Review

    Posted by on 15th Dec 2013

    I purchased this adapter to mount my DirecTV Slimline 5LNB dish on the ladder of my travel trailer. I already had a Jbar mount from an older style dish that I wanted to use but was a smaller diameter than needed. I will be making some changes to this pipe so that it works better. I will use 2 radiator clamps to keep it from spreading open when tightening the 2 bolts, I will use shorter than supplied. I will also be drilling 4 small holes in both the adapter and the jbar to use some self taping metal screws. By doing these modifications I should never have any concern of the dish moving.